Description
FILAMENT-WHITE™ 2,700° CRI 90 + TriRGB LINEAR LED FIXTURE
VECTOR DUOTEK provides end-to-end lines of light by the combination of Filament-White & TriRGB LED technologies
VECTOR DUOTEK >140< provides modular end-to-end illumination ideal for defining building or set outlines. Utilising a specially engineered end-cap system that is only 1mm thin to provide seamless vectors of light.
VECTOR DUOTEK >140< is powered by high-efficiency, high CRI of 90 Ra, Filament-White 2700° Kelvin LEDs carefully combined with TriRGB colour mixing LED devices to provide endless colour mixing capabilities and true warm filament type white from the same fixture. Combining Filament-White and TriRGB sources allows for creation of clean cool white with a very high CRI of 95 Ra. VECTOR DUOTEK >140< can be colour controlled and smoothly dimmed, using external low voltage dimmer drivers even at very low brightness levels.
VECTOR DUOTEK >140< is available in lengths from 100 to 2000mm (pto) allowing for utilisation even on complex architectural features.[VECTOR is also available in MONO or TriRGB options
FEATURES
Linear exterior rated LED luminaire for seamless end-to-end use.
Featuring DuoTek White+TriRGB Technology.
High efficiency Nichia Japan semiconductors.
Fully dimmable to black using AXALIGHT LED dimmers
End-to-End design for seamless results
Filament-White 2700°K CRI 90 Ra + RGB TriColour LEDs
Nichia, Japan LED devices
Single bin colour consistency
High colour rendering
PWM dimming compatible
IP44 or IP66 versions available
SPECIFICATIONS
24 Volt DC SELV 24V DC
4 Channels (circuits)
Common anode (+)
7.1 mm LED-LED pitch 14.3 mm W-W / Tri-Tri pitch
IP66 or IP44 Ingress protection options
CRI Ra90 (Warm White)
CRI Ra95 by colour mixing
-20° ~+50°C ambient temp
PER METER data
70 x Filament-White LEDs – 24 Watts (1.0A) – 2,400lm
70 x TriRGB LEDs – 16 Watts (0.7A) – 450lm
140 x LEDs TOTAL 40 Watts (1.7A) – 2,950lm
